Sol-gel方法制备BiFeO3/Bi4Ti3O12多层薄膜及其电性能

Preparation of BiFeO3/Bi4Ti3O12 multilayer with Sol-gel Method and Its Electric Properties

  • 摘要: 采用溶胶-凝胶方法在FTO/glass底电极上制备了BiFeO3/Bi4Ti3O12和Bi4Ti3O12/BiFeO3多层薄膜。研究了室温下薄膜的结构,铁电性质和介电性质,并将其与纯的BiFeO3薄膜的性质进行了比较。从薄膜的XRD模式中可以观察到共存的BiFeO3相和Bi4Ti3O12相。通过电滞回线测量可以看出,相对于纯的BiFeO3薄膜,BiFeO3/Bi4Ti3O12和Bi4Ti3O12/BiFeO3多层薄膜能够承受更高的测试电场而获得充分极化,从而表现出较强的铁电性,在450kV/cm测试电场下,薄膜的剩余极化强度分别为37μC/cm2和23μC/cm2

     

    Abstract: BiFeO3 / Bi4Ti3O12 multilayer film was prepared on FTO/glass bottom electrodes by sol-gel process. Structure, ferroelectric and Dielectric properties at room temperature were studied by comparing with pure BiFeO3 film. BiFeO3 and Bi4Ti3O12 phase can be identified from the XRD pattern. Comparing with pure BiFeO3 film, the BiFeO3 /Bi4Ti3O12 and Bi4Ti3O12/BiFeO3 multilayer film can endure higher applied field and thus getting fully polarization and show more intense ferroelectricity, Under an applied field of 450 kV/ cm, the remnant polarizations are 37μC/cm2 and 23μC/cm2 , respectively.

     

/

返回文章
返回